Stock/Combo Package

COMBINATION GOOSENECK STOCK & HORSE TRAILER
By placing a slant wall partition toward the front of the Trailer and incorporating a 56" nose compartment over the Gooseneck, Donahue creates a highly usable tack and sleeping room in it's aerodynamically styled stock trailer. This hybrid comes from the same high quality Donahue Stock Trailer with it's full 7 ft. width interior, 10 guage steel lower 18" side wall, and Galvannealed sheet metal used in highly corrosive areas.

Deluxe Package:

Rubber Bumper
Roof Vents
Full Plexiglass Side Vent Inserts
3/4 Solid Rear Gate With Slam Latch

Same Tough Built Quality
Donahue uses Galvannealed sheet metal in highly corrosive areas. Galvannealed is carbon steel coated on both sides with a heat treated Zinc-Iron alloy. It provides corrosion resistance protection and excellent paintability.

Standard Features:

Full 7 ft. inside width.
6'9" inside height
No interior fender wells.
1/8" steel on lower 18" of side wall.
52" high side walls
2 5/16" coupler, 4" pipe, adj. height.
Breakaway switch w/battery box.
12,000 lb. drop leg jack stand.
Rubber torsion axles, 8-bolt hubs.
Electric brakes on both axles.
56" nose compartment w/2 - 12" x 24" Windows
Slant tack room divider.
Seal around tack door w/lockable latch & one 12" x 18" window.
Plexiglass windows, right hand side of tack room.

Rubber mats in tack room.
5 halter hooks in tack room.
2 dome lights, 1 in tack room, 1 at rear.
4 interior & 4 exterior tie rings.
3 tier saddle rack (removable).
1 Center Gate w/Slant Latch 20 ft. & 24 ft. only.
2 1/2" x 1 3/4" rubber rollers on sliding gate.
Double slam latch with safety latch on rear door.
LED clearance , stop & turn lights.
Wiring is overhead and in conduit.
Thoroughly cleaned and primed.
Deluxe color coded trim & side molding.
1/8" aluminum rock guards.
Treated lumber flooring.
ST235/80R 16 LR E 10-ply radials

Optional Equipment:

Removable Three Tier Saddle Rack Standard on All Models

Slant Tack Room Size:

Front - 84"
LH Side - 37"
RH Side - 75 1/2"

Solid center gate - 16' only.
Sliding Center gate.
Spare tire and wheel.
Slant stalls.

Lengths Available:

16ft., 20ft., 24ft.

Donahue exceeds industry standards with GALVANNEALED sheet metal used in highly corrosive areas. The lower 18" of side wall is formed from 1/8" steel, the upper 34" is 1/16" Galvannealed, equals 52". Competition uses 1/16" the full height. Slam latches are provided on the center and rear gate. Rear gate is secured closed with a safety latch. A full 7 ft. inside width with no fender wells and smooth exterior sides gives you the finest trailer on the market today.

Manufacturers Notice: Because of efforts to constantly improve our products, all specifications, equipment and prices are subject to change without notice. The Donahue Corporation reserves the right to improve models without incorporating these changes in similar models produced at an earlier date.

The Donahue Corporation
P.O. Box 126
Durham, Kansas 67438
Phone - (620) 732-2665
1-800-457-7406
Email - info@donahuetrailers.com

For further information contact Jim Donahue.
Web design and maintenance by